Smarter Homes

AUTOMATION SOFTWARE

Web-Link II software is one of the software applications for remote control available at SmarterHomes. This one works inside a home or business single PC, group of PCs and/or local network. Using a High Speed Internet connection like DSL or Cable Modem ou can remotelly over teh web check on the house with video surveillance, record video based an a system event, view previously recorded videos, verify the kids have arrived home from school via email notification. In addition, you can take full control and adjust settings for lighting, heating and air, security, and systems.

TOUCHSCREEN

This is one of the touchscreen controllers available in Smarterhomes. The OmniTouch Touchscreen is parter of Omni family of controlllers and you can Graphically control any Omni a utomation controller with this interface. You can remotelly and instantly control your lights and small appliances, monitoring and adjustments of security and temperatures, including temperature and humidity, pool and spa temperatures, ventilation, decorative lighting and other items under control of the Omni-family system.

This applicaion is also available thru our line of On-Q products.

Remember, Give Us a Call and we will assist you with all your questions, doubts and inquires: 787-775-0028 or support@weareais.com

INTEGRATED AUTOMATION CONTROLLER
Control Your Alarm, Appliances and X10 Devices

The Omni home-control systems is one the manny systema available at Smarterhomes for full home automation. This applicaion is also available thru our line of On-Q products. The following are just a few of the Omni IIe's wide range of automation and security features:

Control Heating and Cooling
Using the compatible Thermostat to control your home's temperatures through your Omni IIe system. Full control of the thermostat is available through the included LCD console, over your telephone (with voice response) and over the Internet with HAI Web-Link II. Connect a temperature sensor to trigger the thermostat in a remote area of your home. The LCD display shows time, temperature and operational mode. Also the system includes adjustable cycle times, filter Clean/Replace indicator, separates operational schedules for weekdays, Saturday and Sunday, with separate heat and cool settings for morning, day, evening and night, among others.

Security
If the alarm is activated, a siren will blare, the display module will show the type of alarm and location of the breach. In addition, any programmed macros can activate connected devices. The system can dial up to 8 different phone numbers using the included telephone interface upon teh alarm activation.

Select DAY mode when the house will be occupied, and interior motion detectors will remain disarmed. Sensors will be disabled in NIGHT mode, but the alarm system sounder will be activated if any door, window or non-sleeping area sensor is tripped. If you're expecting a family member to come home later, select NIGHT DELAY, which functions the same as the NIGHT mode but features an entry delay to allow time to disarm the system. Finally, select AWAY when you leave the house empty to arm all entries and motion sensors.

Assign different levels of access to your employees or family members so that certain people can program the system, while others simply use it to enter and exit. If you are forced to disarm the system against your will by an intruder, disarm it using the Duress Code instead of your normal code. The system will disarm, and no sirens will sound, but the system will perform a silent dial out to announce this silent alarm.

Control Automated Lighting and Appliances
Control almost any light or appliance with the Omni IIe. Using a powerline interface module and a X10 powerline interface you can control to control all of UPB or X10 devices from your HAI Omni IIe touchscreen. In adiditon, the system provides har wired control relays to control hardwired appliances. In general theOmni IIe can control:
· 250 UPB switches, modules, and keypads (up to 8 rooms of HLC Lighting)
· 64 X10 compatible modules (four house codes)
· 64 CentraLite loads and relays
· 64 RadioRA switches and dimmers
· 62 ALC switch modules
· 4 HAI Communicating Thermostats
· 8 PESMs or Voltage Outputs

This systm also features built-in serial ports and an Ethernet port for connection to additional control devices. Choose from a number of accessories to expand your system, including a variety of wireless options.

Control This System With a Telephone Interface
The Omni IIe is equipped with a built-in telephone response feature that allows you to control and access the status of your system from any touchtone phone in your home. The Omni IIe actually talks to you using a digital recording of an actual human voice, and you can send commands to the Omni IIe using the keys of your Touch-Tone telephone. You may also call your system from any remote touchtone phone and enter your code to "talk" to your Omni IIe. Control connected automated devices, arm and disarm the system, or change its mode. You can even hear and adjust temperature settings.

You can also communicate with the Omni IIe through a local or remote PC. The Omni IIe has a built-in modem and can be accessed via phone or over a direct serial connection.